Manual

You can also choose to display camcorder data (shutter speed and exposure

settings) in cassette data codes.

;iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!jj_i

MENU ,.OlSP.SETUP

( [2_140)

1_ _DATA CODE.,.DATE/TIME

To change, open the menu and select DISESET UP. Then select DATA

CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and

close the menu.

Possible data code combinations for cassettes:

DATA CODE

"'"_'m_se_e Date/Time Camera data Date/Time &

D/TIME SEE. _ Camera data

Date

T me

Date & Time

[] Notes:

• The data code will read _ - '-' in the following situations:

- During playback of a blank section of tape.

- If the tape was recorded before entering the date and time in the camcorder's

memory.

- If the tape was recorded on a camcorder without a data code function.

- If noise or tape damage prevents the data code from being read.

• If a recording made on ZR50 MC/ZR45 MC is played back on a different DV

camcorder, the data code may not be displayed correctly.

• The data code will appear in the display even if DISPLAYS (t_1149) has been

set to OFF through the menu.