Manual

1. Press the SEARCH SELECT button to choose between photo/date

search.

• PHOTO SEARCH or DATE SEARCH is shown in the display for 4

seconds.

2. Press the _4 and _ buttons to move backwards or forwards

through the still pictures or between different days of recording.

• Press once to move to the start of the previous/next still picture or day on

the tape.

• You can press more than once to move to the corresponding still picture or

day (up to a maximum of 10 times), e.g. press the _ button 5 times to

move forward 5 still pictures or days.

• PHOTO SEARCH/DATE SEARCH appears in the middle of the display

alongside the _4 or _ mark and number to search through. You can

change direction easily by pressing the button for the opposite direction.

[] Notes:

• Press [] (stop) to stop mid-search.

• If you begin a search very close to the stal* of a recorded still picture during

photo search, the camcorder may skip straight past it.

° When you have set the area for the World Clock, date search also looks for the

change in date based on the adjusted time.

° A date/area cannot be identified if the total recording time on that day/area was

less than 1 minute.

° Date search playback may start just before or after the beginning of the located

section.

° If the data code is not displayed correctly you will not be able to operate the

date search correctly.