Manual
1. Find a point on your recorded cassette slightly before the section
you want to copy and set it to playback pause mode.
2. Press the REC PAUSE button on the wireless controller.
• The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor the
picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording, press
the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
[] Notes:
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
• _ You cannot use a cassette recorded in [] SP or [] LP mode with the
camcorder for DV dubbing with another digital device not equipped with that
mode.
• _ You cannot record in SP or LP mode from a tape recorded in [] SP or
[] LP mode. Likewise, you cannot record in [] SP or [] LP mode from a tape
recorded in SP or LP mode.
• When dubbing to a cassette with digital video equipment, be sure to set AV "*
DV OUT to OFF in the menu.
;iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!jj_i
m
5'
Certain pre-recorded software tapes are copyright protected. If you try to play
back such a cassette, COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED'_appears in the display for a few seconds and then the camcorder
displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable COPYRIGHT
PROTECTED DUBBING RESTRICTED'_appears in the display; you cannot
record the contents of the tape.
89