Measurement Guide
EN
SITE PREPARATION & FOUNDATION
A - SET A SOLID SURFACE PRIOR TO ASSEMBLY
Concrete / tiled floor & wall Wooden surface (floor or wall) Concrete / tiled floor & wall Wooden surface (floor or wall)
The screws and masonry anchors
supplied with the kit are suitable
for concrete / tiled floor & wall
xing only.
Please consult with an expert
regarding which fasteners are
suitable for other surfaces types
(not supplied).
B - USE THE RIGHT SCREWS ON YOUR SURFACE
6 cm / 2.4”
The wall mounting prole (top back) can be adjusted
from 239.4 to 306.6 cm (94.3" to 120.7") measuring
from the ground to t your space.
Decide what height and distance from
the wall you would like to mount your
patio cover.
This will determine the roof angle.
Please note that while the product
appearance may change slightly as
a result of that angle, the snow load
weight does not change.
Poles distance from the wall can be adjusted from
332 to 342.1 cm (130.7" to 134.7") as illustrated in
the Diagram.
C - FIT YOUR PATIO COVER DIMENSIONS TO THE SITE
A
B
A
Wall mounting height
B
Pole to wall depth
IMPORTANT
We recommend checking for
restrictions or covenants for
building this product in your
area. In addition we advise to
check if you need to submit
any forms or if any permit is
required prior to building the
product.
ENEN
STOCKHOLM PATIO COVERS - INFORMATION