User manual

Chapter 2 - Basic Operations

Error status screen

This screen shows error messages.

• Error is not detected

No Error

• When error has occurred (When status LED is lit red)

not detected:

VIDEOin REFin

VIDEOin ......................Analog input signal specified by “001 video input“ can’t be detected

during Analog  DV mode. If “104 DVout auto-mute” is set to off, error

will not occur even when no analog input signal can’t be detected.

* When “601 SG output” is set to ON, this message will not be displayed.

REFin ..........................Sync signal from the REF input connector can’t be locked, while

“401 ext. sync” is set to “enable” or “advanced” during Analog  DV

mode.

* When “601 SG output” is set to ON, this message will not be displayed.