Product Brochure

- 20 -
Endura® brand products are manufactured by
Canplas Industries Ltd
SECTION 22 13 23
GREASE INTERCEPTORS
Copyright 2014 - 2016 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Grease interceptors (Hydromechanical).
1.2 RELATED SECTIONS
A. Section 22 13 00 – Facility Sanitary Sewerage.
1.3 REFERENCES
A. CAN/CSA-B481.1: Testing and Rating of Grease
Interceptors using Lard.
B. PDI G101: Testing and Rating Procedure for
Hydromechanical Grease Interceptors.
C. ASME A112.14.3: Grease Interceptors.
1.4 SUBMITTALS
A. Submit under provisions of Section
01 30 00 - Administrative Requirements.
B. Product Data: Manufacturer’s data sheets on each product
to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and
recommendations.
3. Installation methods.
1.5 QUALITY ASSURANCE
A. Manufacturer Qualications: Minimum ve (5) years of
experience manufacturing similar products.
B. Installer Qualications: Minimum two (2) years of
experience installing similar products.
1.6 PRE-INSTALLATION MEETINGS
A. Convene minimum two weeks prior to starting
Work of this section.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Deliver and store products in manufacturer’s unopened
packaging bearing the brand name and manufacturer’s
identication until ready for installation.
B. Handling: Handle materials to avoid damage.
1.8 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature,
humidity, and ventilation) within limits recommended by
manufacturer for optimum results. Do not install
products under environmental conditions outside
manufacturer’s recommended limits.
1.9 SEQUENCING
A. Ensure that products of this section are supplied
to aected trades in time to prevent interruption of
construction progress.
1.10 WARRANTY
A. Endura® Grease Interceptors (7-50 GPM) and Solids
Interceptor products as manufactured by Canplas
Industries Ltd shall be supported by a 10 year
manufacturer’s extended warranty.
B. Endura®XL Grease Interceptors as manufactured by
Canplas Industries Ltd shall be supported by a
manufacturer’s limited lifetime warranty.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Canplas Industries Ltd., which is
located at: ; Canada; 500 Veterans Dr. P.O. Box 1800; Barrie,
ON, Canada L4M 4V3; Toll Free Tel: [phone];
Tel: [phone]; Fax: [phone];
Email: [e-mail];
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with
provisions of Section 01 60 00 - Product Requirements.
2.2 GREASE MANAGEMENT
A. Endura® Grease Interceptors and Solids Interceptor products
shall be from a single source of manufacture, Canplas Industries
Ltd. These products may be oered nationally, regionally or
locally by wholesale or retail distributors.
2.3 GREASE INTERCEPTORS
A. Product: Endura® Compact Grease Interceptor 7-15 GPM as
manufactured by Canplas Industries Ltd.
1. The unit shall be comprised of engineered thermoplastics to
withstand operational temperatures up to 220 degree F
(104 degree C) comprising a pedestrian rated cover
capable of supporting 440 lb (200 kg)and incorporating an
operationally air tight seal. The cover shall also utilize a quick
access latching system to functionally retain and secure the
cover to the tank, but allow consistent removal and
replacement of the cover without operational compromise.
Functional elements such as baes will be made of material
that prevents corrosion or deterioration and shall be easily
removable for the purposes of maintenance, providing
unrestricted upstream and downstream drain access.
The grease interceptor shall be certied to the current
version of the PDI-G101, ASME A112.14.3 or CSA B481.1 and
where locally applicable have UPC listing.
a. A ow control device with integrated air intake and
tool-less access to the orice in service shall be provided
with the interceptor.
2. Model 3907A02 - Endura® 7GPM/14LB
(No-Hub connection – Mechanical Joint coupling).
Model 3907A02T - Endura® 7GPM/14LB (Threaded connection).
Model 3907A02S - Endura® 7GPM/14LB (Spigot connection).
a. Flow Rate: 7 US Gallons per Minute (0.44 L per second).
b. Average Eciency % (ASME 112.14.3): 95.5%.
c. Minimum Grease Capacity: 14 lb (6.35 kg).
d. Grease Capacity Actual: 31.95 lb (14.49 kg).
e. Unit Weight (Empty): 13.8 lb (6.26 kg).
f. Liquid Capacity: 12.96 gal (49.06 L).
g. Connection size: 2 inches (51 mm)
3. Model 3910A02 - Endura® 10GPM/20LB
(No-Hub connection – Mechanical Joint coupling
Model 3910A02T - Endura® 10GPM/20LB (Threaded connection).
Model 3910A02S - Endura® 10GPM/20LB (Spigot connection).
a. Flow Rate: 10 US Gallons per Minute (0.63 L per second).
b. Average Eciency % (ASME 112.14.3): 92.5%.
c. Minimum Grease Capacity: 20 lb (9.07 kg).
d. Grease Capacity Actual: 38.1 lb (17.28 kg).
e. Unit Weight (Empty): 13.8 lb (6.26 kg).
f. Liquid Capacity: 12.96 gal (49.06 L).
g. Connection size (mechanical): 2 inches (51 mm).
4. Model 3915A02C - Endura® 15GPM/30LB
(No-Hub connection – Mechanical Joint coupling)
Model 3915A02CT - Endura® 15GPM/30LB (Threaded connection).
Model 3915A02CS - Endura® 15GPM/30LB (Spigot connection).
a. Flow Rate: 15 US Gallons per Minute (0.94 L per second).
b. Average Eciency % (ASME 112.14.3): 92%.
c. Minimum Grease Capacity: 30 lb (13.6 kg).
d. Grease Capacity Actual: 40.97 lb (18.58 kg).
e. Unit Weight (Empty): 13.8 lb (6.26 kg).
f. Liquid Capacity: 12.96 gal (49.06 L).
g. Connection size: 2 inches (51 mm).
B. Product: Endura® Grease Interceptor 20 GPM as
manufactured by Canplas Industries Ltd.
1. The unit shall be comprised of engineered thermoplastics to
withstand operational temperatures up to 220 degree F
(104 degree C) comprising a pedestrian rated cover capable of
supporting 440 lb (200 kg)and incorporating an operationally
air tight seal. The cover shall also utilize a quick access latching
system to functionally secure and retain the cover to
the tank, but allow consistent removal and replacement
of the cover without operational compromise. Functional
Specications