User's Manual

CANSEC SYSTEMS LTD., 3105 Unity Drive, Unit 9, Mississauga, Ontario, L5L 4L2 Tel: [phone] Fax: [phone]
SPECIFICATIONS:
Reader Output:
26 or Cansec Proprietary Wiegand
Operating Temperature:
-40 to +70 C
Indoor (Outdoor with Heated Enclosure)
Size:
3 1/4" (w) x 4 3/4" (h) x 1 1/2" (d)
Weight:
10 oz
Housing:
High Impact Polycarbonate (Lexan)
Mounting:
Single gang electrical box
Sensor:
Manufacturer: SecuGen
®
Type: Optical
Verification: <1 Second (after template is read)
Supply Voltage:
12VDC, 400 mA
LED Indicators:
Bi-Color Standard (red, green)
1 x Authentication Indicator
1 x Externally Controlled Indicator
Audio Tone:
Standard
Cable:
22 AWG, 6 Conductor, Stranded,
Overall Shield,
Maximum 500 ft. to controller
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of more of the following measures:
• Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by Cansec Systems Ltd. could void the user's authority to operate the equipment.