User Manual

Access the VIDEO MENU by pressing the MENU button while in VIDEO MODE.
Video Length
Exposure
Parking Mode Sensor
Resolution
OK
Enter
MENU
Back
1080 P
P
Use the UP and DOWN buttons to select setting options and press the OK button to enter
the sub-menu.
Once you access the sub-menu, highlight the desired setting and press the OK button to
confirm your selection and to return to the VIDEO MENU.
Press the MENU button twice to return to video mode.
TIP:
- You are not able to access the UltraDash C1 menu while the camera is recording.
•
OPTIONS: 1080P 30fps/720P 60fps
• Video Length: Set the length for each individual video clip. The video recorded by
UltraDash C1 will be split and stored as individual video clips. The loop recording
function will automatically overwrite the oldest and non-protected video clip when the
memory card is full.
OPTIONS: 1 Minute (default)/3 Minutes/5 Minutes
• Exposure: Adjust exposure levels settings.
OPTIONS: +2/+1/ 0 (default)/-1/-2
• Parking Mode Sensor: If the parking mode sensor is turned on, C1 will enter sleep
mode when the vehicle is turned off or when C1 loses its power supply.
In the sleep mode, if C1 detects any external forces, it will automatically turn on and
take a 30 second video and turn off afterward. The videos taken in this situation will all
be protected. You can adjust the sensitivity for the parking mode force sensor here.
The parking mode feature requires the hardwiring to permanent power.
(Hardwire kit is sold separately)
OPTIONS: On/Off (default)
Resolution: Choose the video resolution.
17
VIDEO MENU