User Manual

My UltraDash S1’s
battery powers up for
6 minutes only
Your cameras Auto Power Off feature is working properly.
In the event of power loss, the camera will turn off automatically.
Remember, this is not intended as an alternate power source
and will need to be charged regularly.
ACard Error” message
appears on my
UltraDash S1
This indicates that the Micro SD card is not properly formatted
to your UltraDash S1. Please remove the file you would like to
keep on to your PC and preform a “Format Memory Card”
procedure to allow your memory card to function properly with
the UltraDash.
ACard Full” message
appears on my
UltraDash S1
When this message appears, you Micro SD card is at full
capacity. A reminder that when you have protected files,
you limit the use of your memory card. You can delete
unnecessary files to allow maximum use of your memory
card.
A buzz is created when
my UltraDash is
connected to my TV
Be sure that your UltraDash S1’s AV cable is connected
correctly. The audio jack (2.5mm) can be purchased on the
Cansonic website.
My UltraDash’s ‘Parking
Mode is active but now
I cannot stop the
recording
Reminder that the UltraDash will begin recording when there is
motion detected. If you would like to turn this feature off, turn
the UltraDash off and remove the memory card to avoid further
automatic recording. Once removed, go to your menu and turn
the ‘Parking Mode feature off.
I press the MENU button
but nothing happens
Reminder that the UltraDash will not let you access the menu
while it is recording. To access the menu, stop recording and
the MENU feature will be accessible.
If your camera begins recording, please reference the Parking
Mode tab above.
When I download files
from the Cansonic
website a malicious
software message
appears
If this message appears, simply adjust your browser settings
and allow for Cansonic to allow the download to proceed.
Once complete, reset your browsers security to protect your
PC.
Unresolved Issues
If you continue to have consistent problems with your Cansonic
UltraDash S1, please reset your camera to default settings in
the setup menu and begin the process over again.
If these problems remain, please describe your question and
send it to service_usa@cansonic.com or call our customer
service number provided on the Cansonic Website.
33