User Manual
Access the SETUP MODE by pressing the MODE button.
Use the UP and DOWN buttons to select setting options and press the OK
button to enter the sub-menu.
Once you access the sub-menu, highlight the desired setting and press the OK
button to confirm your selection and to return to the SETUP MODE.
Press the MENU button to return to the current mode.
Note: Cansonic UltraDuo Z1 default settings have been selected for great
image quality and ease of operation. Under most circumstances, you don’t
need to change the settings.
Note: The setup mode cannot be accessed while the camera is recording.
• Sounds: Adjust the button beep sound, volume, and voice recording.
OPTIONS:
Audio Recording: On (default)/Off
Click Sounds: On (default)/Off
Volume: 0/1/2 (default)/3
• Screen Saver: UltraDuo Z1 has a function to let the screen shut down after a
period of inactivity. Press any button to re-activate the display.
OPTIONS: 1 Minute/3 Minutes/5 Minutes/Off (default)
• Time & Date: Adjust the TIME and DATE as required by using the LEFT and
RIGHT buttons, then use the UP and DOWN buttons to set the value. Press
the OK button to save the setting and return to the SETUP MODE.
• Language: Select a preferred language.
OPTIONS: English (default)/Simplified Chinese/Japanese/Russian/Korean
• TV System: Set up the AV output signal.
OPTIONS: NTSC/PAL (default)
•
•
•
•
•
•
•
•
•
•
26
SETUP MODE