User Manual

• G Sensor: G sensor is the sensor that can detect forces. When it senses any
forces, it will protect the current file automatically. Adjust the sensitivity of G
sensor here.
OPTIONS: High/Medium (default)/Low/Off
• Frequency: Set up the AV output frequency.
OPTIONS: 50 HZ/60 HZ (default)
• GPS: Turn the GPS function ON or OFF. (GPS logger is sold separately.)
OPTIONS: On/Off (default)
• MetaData Stamp: Turn the Information stamp including the acceleration,
speed data on the recorded files ON or OFF.
OPTIONS: On (default) /Off
• Cansonic Stamp: Turn the Cansonic logo stamp ON or OFF on the recorded
files.
OPTIONS: On (default) /Off
• Stabilizer: Stabilize the image.
OPTIONS: On (default) /Off
• Rotate Display: Rotate the user interface upside down. This helps operate
the camera in cases that you want it mounted reversely.
OPTIONS: On/Off (default)
• Time Zone/DST: Select the time zone setting.
OPTIONS: -12/-11/-10/-9/-8 (default)/-7/-6/-5/-4/-3/-2/-1/GMT/+1/+2/+3/+4/
+5/+6/+7/+8/+9/+10/+11/+12
•
•
•
•
•
•
•
•
•
•
•
•
•
27