User Manual

8
2.3.15 PTZ data analysis
Search the Control protocol code from Multifunction keyboard or DVR by RS485 interface, test the
PTZ control command data whether received anomaly and RS485 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P:A0 00（Add） xx xxxxxx AF xx
PELCO-D:FF 01（Add）xx xxxxxxxx
2.3.16 Digital Image zoom on the monitor
Set image zoom up to 4X to get a closer look at all the image detail. Supports analog and many IP
cameras
2.3.17 Video screenshot
Capture the video image, and save it as JPEG file in the SD card.
2.3.18 Record
Capture the video frames as JPEG file
2.3.19 Playback
The recorded files can play directly via Media player or under the function of “Playback”.
2.3.20 Cable tracer（ * Optional ）
Cable identification by use of an audio signal. This function enables the blue cable tracer to find the
connected cable from a bundle of cables with an audio tone.
2.3.21 DHCP dynamic address assignment
Built in DHCP server: Dynamically assign IP address for the IP camera or network device.
2.3.22Access the dynamic IP address
The IP tester can directly access a dynamic IP address assigned from its DHCP server and use it as the
tester's IP address. No need to set a IP address manually.
2.3.23 Multiple network IP Cameras Test
Supports Multi- segmented Static IP address setting which can simultaneously test different segments of