User Manual

18
3.2.2 Analog camera connection
(1) The camera or dome video output is connected to CCTV IP Tester VIDEO IN,the image
display on the tester .
(2) IP Tester “VIDEO OUT” interface connect to the Video input of monitor and optical video
transmitter and receiver, the image display on the tester and monitor
(3) Connect the camera or the speed dome RS485 controller cable to the tester RS485 interface
(Note positive and negative connection of the cable)
3.2.3 HD Coaxial camera connection
*TVI camera are classified as HD coaxial cameras. Hereby the following instruction of how to connect
SDI camera to the tester is also applied to TVI camera.