User Manual

19
(1) Connect the SDI camera's video output to the IP tester’s “SDI IN” interface, the image will display
on the tester. The tester only come with SDI input interface. There is no SDI output interface.
(2) Connect the SDI camera or the speed dome RS485 controller cable to the tester RS485 interface
(Note positive and negative connection of the cable).
3.3 OSD menu
 Press the key 2 seconds to turn on
 Press the key 2 seconds to turn off
 short press the key to enter sleep mode, press it again to test if tester work abnormally
and cannot be turned off , Press the key several seconds to turn off, the tester reset