User Manual

32
to full display on the screen and output, click to return main menu.
Application
A. When maintaining the dome camera, the tester sends out the color bar by its BNC output to the
monitor at the monitoring center. If the monitor receive the color bar, it means the video transmit
channel works normally. Meanwhile on the basis of the received color bar, the monitoring center can
judge if transmission has loss or interference.
B. The tester sends out the pure color bar (such as white and black color), to test the monitor whether
has bright or black dots
C. The tester sends out video signal image to test if the image received by the monitor has excursion.
3.3.3 ONVIF
The Open Network Video Interface Forum (ONVIF) app is used to connect to ONVIF compliant IP
cameras only. If the IP camera's video stream is MPEG4, use the ONVIF (SD) mode. If your IP
camera's video stream is H.264, use ONVIF HD (High Definition), HD mode cannot support
MPEG4. While in SD mode, if the network camera resolution is 720P or higher 720P, the image
display may be delayed. While in HD mode, if the network camera stream is H.264, the tester can
fluently display the image up to 1080P.
Click icon to enter then tap either the "ONVIF" icon is for SD mode (MPEG4) and the "ONVIF
HD" icon is for HD mode (H.264).