User Manual

51
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV TESTERPRO and cable tester. And then the
connection status, cable type and the sequence of wires as well as the serial number of the cable tester
kit will be displayed.
The number of the cable tester is 255
If need several different number other types cable testers, should pay the additional cost.
3.3.9 Port finder
Connect a network cable to the meter’s “LAN” port; click the icon to open the Port Flashing app.
Click “Start”. The IP tester sends a unique signal to make the connected LAN port of the switch flash
If the tester and PoE switch are connected well, the LAN port of POE switch flash at special frequency,
If not, no any changes on the LAN port