User Manual

61
will stay on. Click the Time Setting
button to set a timer that will shut off the lamp.
3.3.15 PoE/PSE Voltage test
Click icon icon to enter the PoE voltage in line measurement app.
Connect a network cable from a PoE switch to the IP tester’s PSE IN port. Connect an IP camera or
other PoE using node to IP tester’s LAN port, the PoE voltage and the cable’s pin connection status
show on the screen.
Note:This test if for measuring the voltage being drawn by the PoE node and the IP tester must be
between the PoE switch and the PoE node for this test to work.
Note: The PoE switch must be connected to the PSE IN port. The powered device such as IP camera or
other PoE node must be connected to the LAN port.
Note: Do not connect PoE power supply equipment (such as a PoE switch) to the tester’s UTP/SCAN
port; otherwise it will damage the tester.