User Manual

66
1 .Don’t input any power into the “DC12/1A OUTPUT” port of the IP camera tester to avoid
destroy.
2. Don’t output this DC12V/1A power to the DC12V/IN port of the IP camera tester to avoid destroy
3. The IPC tester power output is close to 1A, if the IP camera’s power is over 2V, the tester will
auto enter protection mode. Disconnect all the connections of the tester and then connect the
tester with power adaptor to resume the tester.
4. Make sure the tester is full charged or more than 80%, otherwise the tester will shows “low
power”, “not able to supply power”
3.3.20 Application tools
Click the icon to open the Application Tools folder. This folder contains useful apps such as
Audio Recording, DHCP Server, Network test, Notepad, Link monitor and RTSP Player.
Audio Record: Connect an audio device t the IP tester’s audio input port. Click the icon to enter
the Audio Recorder app. Click the red button to stop, and the unit will prompt you to save the recording.
Net work test (Ethernet bandwidth test)
To use the Network tester, you will need two IP testers. One is used as a Server and the other as a Client.
Both devices must be on the same network segment in order to communicate. Click the icon to