User Manual

4
Optional ）
 Enhanced Color bar generator: PAL/NTSC multi-system color bar video generator
(Eight-system switchable, transmit/receive eight-system colorful images).
 Cable tracer by sending an audio signal, enables the blue cable tracer to find the connected
cable from a bundle of cables.（* Optional ）
 Ping test: PING is the most conventional network debugging tool; it is used for testing if the
connected IP camera or other network equipment’s Ethernet port is working normally and the
IP address is correct.
 In digital IP surveillance applications, if the IP camera’s IP address is not known; the device
cannot be used. An IP address scan can quickly search for the connected IP camera or other
network device’s IP address
 The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an
IP camera
 TDR cable test, test cable short-circuit and short-circuit（* Optional ）
 Cable test: Tests LAN cable sequence of wires
 Support RS485,Rate 600 ～ 115200bps adjustable
 PTZ protocol analysis, control protocol command displays to check RS485 transmission
whether is normal, easy to find the fault device
 PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
Sets and the preset position
 DC12V 1A output power for cameras
 Audio input t test.
 3.7V 3000mAh,Lithium Ion Polymer Battery can last 10 hours for normal use after charging
for 4-5 hours. Remaining battery charge indicator
“*”Sign means the function Optional