User Manual

77
After setting an advanced IP address (refer to above photos), the tester can test two network segments
(192.168.0.0) and (192.168.1.0).
WLAN:Turn WiFi off or on by pressing the “Open the Wi-Fi” button. Once Wi-Fi is turned on, it will
scan for wireless networks in your area. Select the desired wireless network SSID and enter your
password to connect networks in your area.
Brightness::Set the desired brightness of the IP tester and adjust the sleep time settings.
Volume: Set volume level.
SD Card: Displays SD Card Capacity. You can also format the SD card or unmounts it before
removing it
FTP serve: Once the IPC tester connects to a network, a computer can be used to read the SD card files
via FTP.