User Manual

82
playback
12V/1Apower
output
Output DC12V/1A power for camera
Audio test
1 channel audio signal input, test whether sound normal, supports record
and save audio
PTZ control
Support RS485 control, Baud 600-115200bps, Compatible with more
than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin,
Yaan, etc
Video signal
generator
Output one channel PAL/NTSC color bar video signal for testing
monitor or video cable.(red, green ,blue, white and black color )
color bar
generator
Local side PC can login the tester, send the signal by network ,test
network connection communication whether normal
UTP cable tester
Test UTP cable connection status and display on the screen. Read the
number on the screen
Data monitor
Captures and analyzes the command data from controlling device,also
can send hexadecimal
Network test
IP address scan, link scan, and Ping test. Quickly search the for IP
camera’s IP address on your network
Cable search
* (Optional)
Find a connected cable from a bundle of cables using audio tones
PoE test
Measures PoE switch voltage and displays pin configuration
Digital Multimeter
* (Optional)
AC/DC Voltage,AC/DC current,Resistance,Capacitance,Data
hold,Relative measurement,Continuity testing . Testing speed: 3 times/
seconds,Data range -6600～+6600.
Optical power
meter * (Optional)
Calibrated Wavelength(nm) :850/1300/1310/1490/1550/1625nm
Power range(dBm) :-70～+10dBm
Visual fault locator
* (Optional)
Test fiber’s bending and breakage ( SM and MM fiber)