Manual

254
Figure 5-29
Please refer to the following sheet for detailed information.
Parameter
Function
Max connection
It is the max Web connection for the same device. The value
ranges from 1 to 120. The default setup is 120.
TCP port
The default value is 37777. You can input the actual port
number if necessary.
UDP port
The default value is 37778. You can input the actual port
number if necessary.
HTTP port
The default value is 80. You can input the actual port number if
necessary.
HTTPS
The default value is 443. You can input the actual port number if
necessary.
RTSP port
The default value is 554.
5.8.2.4 WIFI AP
Please note this function is for some series only.
The WIFI AP interface is shown as in Figure 5-30. Here you can set WIFI hotspot, so that the network
camera can use the hotspot to connect to the network.