Spec Sheet
VTOB112
Features
· Material:SPCC
· Size:367.4mm*143.4mm*50.8mm
· Weight:0.9kg
· Flush Mounted Box
VTOB112
Flush Mounted Box for 3 Modules
Installaon
a) Dig a hole on wall. Module VTO has speicicaons of
single module, 2 modules and 3 modules. A single module
dimensions are 115*115*57(mm); 2 module dimensions are
237*125*50(mm), 3 module dimensions are 349*125*50(mm).
b) Embed case into wall unl border of the case lean against
the wall.
c) Align the device on front panel with hole posion. Fix with
screw (M3×6 cross recessed countersunk at tail machine
screw), and the module is fastened on front panel.
d) Fix front panel on case according to hole posion, x with
(M4×40 inner hex ower sunk head at tail machine screw),
and front panel is fastened on the case.
e) Write room no. on provided name card or name of resident.
Insert name card cover.
Note:
a) Name card and name card cover are included in accessories
by default.
b) You may power up device only aer all modules are well con-
nected, otherwise module connected aer power up will not
operate.