Operation Manual

36
Extended functions
The menu for extended sound functions offers you the chance to correct out-of-synch
playback, to activate the output for a wired external subwoofer, to adjust the playback
to suit the location and to switch the Dolby function “Dynamic Range Compression”
on or off.
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
If you press and hold the key marked “Sound” on the remote control for longer than
3 seconds you will enter the “Extended functions” menu and the display
LIP
will
appear on the Soundbar.
You can now use the Volume +/– keys to delay the playback in 10 ms steps.
Press the “Sound” key briefly once more and the display
sub
will appear.
The Volume +/– keys can also be used to switch the output for an external subwoofer
on or off. Please note: when the SUB OUT is activated the playback of the Soundbar
will be filtered at 80 Hz.
Press the “Sound” key again briefly one more time and the display
eq
will appear.
Now use the Volume +/– keys to choose between three pre-set equalizer settings to
adjust the playback to suit the location.
English