Operation Manual

39
English
IR delete function (only DM 75)
To delete the TV remote control commands learned by the DM System you need to follow these steps:
1
Switch the Soundbar on.
2
Press the “On/Standby” key on the Soundbar remote
control for approx. 5 seconds.
3
The display will flash
IRL
.
4
Press the “Mute” key of the Soundbar remote control
for approx. 5 seconds.
5
The display will show
CLR
for approx. 5 seconds. The Soundbar
will then switch automatically back to normal operation.
Note: The red “On/Standby” key on the DM remote control has a dual function. Press it once and the display will show
ON
, which allows the switching on function to be programmed. If the red “On/Standby” key on the DM remote
control is pressed twice in quick succession the display will show
STB
and the Standby or switching off function can
be programmed. If your TV remote control has only one key for the “On” and “Off” functions both the “On” and
“Standby” functions must still be allocated with this command.