Operation Manual

Problem Possible cause Solution

No playback via

Bluetooth

1. There is no connection between the

DM System and the mobile end device.

1. Connect your mobile end device as described.

2. The mobile end device is paired but

no playback takes place.

2.1. The mobile end device must be connected again.

2.2. Set the volume on the mobile end device to maximum.

2.3. Increase the volume of the DM System.

2.4. Ensure that interference sources like a WLAN router

or laptop are not set up in direct proximity of the DM

System.

2.5. Concurrent operation of WLAN and Bluetooth

connection from a mobile end device is not possible

without interferences in most cases. (Disable WLAN

at your mobile device.)

3. You are out of range. 3. Reduce the distance between the Soundbar and your

mobile end device.

English