Installation Instructions

English

Option 1

Requirements:

- The musicbox Air 3 must be connected to the mains and switched on. The LED ring must not be ﬂashing

rapidly (2x per second) green or red

- You have a WPS-enabled 2.4 GHz WLAN router

- The router must be within range of the musicbox Air 3

Procedure:

1. Press the WPS button on your WLAN router (See the instructions of your router for more information,

if necessary)

2. Now press the “WP SETUP” button on the musicbox Air 3 until the LED ring starts to ﬂash alternating

green and red

The log-in process will run automatically but may take a little time. A successful log-in is shown by a constant

green light on the LED ring.

If the LED ring continues to ﬂash green, the process has not been successful. To solve this problem please

read the chapter “Troubleshooting” in the Operating Instructions musicbox Air 3 starting on page 35.

You can connect your musicbox Air 3 to your network in three different ways

Log-in to a WPS-enabled WLAN router