Installation Instructions

43
English
Playback in Stand-Alone Mode (without network connection)Option 2
The Stand-Alone Mode provides wireless music transmission between a (mobile) end device and the musicbox
Air 3 without the need of a WLAN router. Please note that the Wi-Fi connection of your (mobile) end device is
occupied by the musicbox Air 3, in this mode. For example, no internet connection is possible.
Requirements:
- The musicbox Air 3 must be connected to the mains and switched on. The LED ring must not be flashing
rapidly (2x per second) green or red
- An Apple device with iOS 4.3.3 or later or a Mac/PC with iTunes 10.2.2 or later
- A Smartphone with Android Operating System
Procedure:
1. Press and hold the “POWER” button on the musicbox Air 3 until the LED ring shows a constant red light.
The LED ring must not be flashing rapidly green (2x per second), wait until the musicbox Air 3 is operational
2. Now connect your playback device as described in Step 3+4 of chapter “Manual log-in to your WLAN
router” (starting on page 29)
3. The selection of musicbox Air 3 as playback device is done as described in the chapter “Playback of music”
(starting on page 39)
To deactivate the Stand-Alone Mode press and hold the “POWER” button until the LED ring flashes or lights
up constantly green.