Installation Instructions

44
English
Option 3
Requirements:
- The musicbox Air 3 must be connected to the mains and switched on. The LED ring must not be flashing
rapidly (2x per second) green or red
- An Apple device according to “compatible Apple devices” in the operating instructions (page 30)
Procedure:
1. Connect your Apple device to the musicbox Air 3 using the “Apple 30 Pin to USB cable”. You should
hear a signal confirming the correct connection
2. Select a title from the “Music” app of your Apple device (image 1)
3. Select the AirPlay symbol and then select “Dock Connector” (images 2+3)
4. The music is now played back by the musicbox Air 3
Attention:
Before playing music you should set the volume to less than 20% as the volume level can be very
igh depending on the music content.
Image 1 Image 2 Image 3
Playback over the USB port
Playback
With your musicbox Air 3 you can play music in four different ways