Operation Manual

30
English
LINE-IN
3.5 mm jack socket for connecting any playback device (CD player,
DVD player, MP3 player, TV ...) with analogue output (output level
max. 2 Vrms).
USB port
- To charge an USB client (iPod, iPhone, iPad, other mobile
phones etc). Maximum output = 2.1 A
- To transfer network access data via your Apple device.
Attention: Your device must have iOS Version 5.0 or later installed
- To transmit audio files from your Apple device.
Attention: Your device must have iOS Version 4.3.3 or later
installed
POWER
- To switch on the device or activate Standby Mode
- To activate or deactivate the Stand-Alone Mode
(hold the button down until the LED ring lights up red)
VOLUME +/–
- To change the volume of the system
- + = increase the volume
- – = decrease the volume
RESET
To recover the factory settings. In order to recover to the factory
settings this button must be pressed for longer than three seconds.
Attention: Your network access details will be lost during this pro-
cess. (Hold the button down until the LED ring flashes green rapidly
to show that the musicbox Air 3 is restarting. Do not release the
button until this happens.)
WP SETUP
To set up the musicbox Air 3 network connection.
Compatible Apple devices
Connections and operating elements
- iPod touch (1st, 2nd, 3rd, and 4th generation)
- iPod nano (2nd, 3rd, 4th, 5th, and 6th generation)
- iPhone 4S
- iPhone 4
- iPhone 3GS
- iPhone 3G
- iPad (3rd generation)
- iPad 2
- iPad