Operation Manual

36
English
Actions Problems Possible causes Solutions
Connection using
WP SETUP.
No connection
between router and
musicbox Air 3 can be
established.
3. The musicbox Air 3 is not in WP SETUP
Mode.
3. Press the WP SETUP button until the
LED ring is blinking alternating green
and blue. If it blinks blue/red, you’ve
held the button too long.
Manual connection. The musicbox Air 3
can not be selected
as a network and is
not displayed as a
“wireless” device in
the network router’s
“connected devices”
menu.
1. The WLAN initialisation of the mu-
sicbox Air 3 has not been completed.
1. Wait a moment, since the musicbox
Air 3 requires up to 60 seconds to ini-
tialise the network and to be displayed
in the network router.
2. The WLAN adapter of your WLAN-
compatible device (e.g. notebook) is
deactivated.
2. Activate the WLAN adapter of your
WLAN-enabled device. You may need
to refer to the instructions provided
with the WLAN device.
3. Your WLAN-compatible device is al-
ready connected by a network cable.
3. Remove the network cable. Only a
wireless (WLAN) connection is permit-
ted.
4. The musicbox Air 3 has not been set
into the manual connection mode.
4. Press the WP SETUP button on the
musicbox Air 3 until the LED ring blinks
alternating red and blue. If is blinks
green and blue, the button was not
pressed long enough.
No connection es-
tablishment between
router and musicbox
Air 3.
You have entered incorrect access data
for your network.
Please ensure that the access data is
correct and enter the correct data.