Operating instructions

32
33
English English
Canton musicbox M
Connections musicbox M
1
- On/off switch power supply
2
- Power supply socket
3
- Subwoofer output
4
- FM Radio Tuner
5
- Analog Input (LINE)
6
- Digital Input (optical)
7
- Service interface
Connection terminal
FM RADIO
ANTENNA
LINE
1
2
34 5
7
6
Connection
Observe that all electrical components are switched off before connection. Depending
on type and equipment of the sources used, there are different options of connecting
the musicbox M.
Input (analogue)
The input marked “LINE” at the musicbox M can be used to connect a source device
with analogue line outputs (e.g. CD player, gaming console, etc.).
Input (digital input)
The digital input marked “PCM Audio, Digital Input” at the musicbox M can be used
to connect any source device with optical digital output (e. g. TV, Sat receiver, BD
player, etc.). Assign the optical digital output of your supplying device for this.
ATTENTION: Observe correct setting of the connected device. The musicbox M can
only play back sound when you have selected “PCM-Stereo” or “PCMDownmix”
in the sound menu of your supply device. “DTS
®
” or “Dolby Digital
®
” coded output
formats (Bitstream or RAW) cannot be played back. If you have any questions on set-
tings, use the instructions of your supply device.
FM Tuner
The input marked “FM-Radio” at the musicbox M serves connection of an antenna
cable for radio reception. You may use both a cable/room antenna or a broadband
connection.
Output
Use the socket marked “SUB OUT” of the musicbox M for connection of an external
subwoofer.
SUB
aerial output /
cord antenna
FM-Radio LINE digital Input
analog
Output
digital
Output
Note
When performing the connection, observe correct
connection between the left and right channel and
use only shielded cinch cables to prevent transfer
of interferences. To connect a device with digital
output, use an optical digital cable (Toslink).