Operation Manual

38
Operation of the radio function (FM radio)
Prerequisites for radio reception
- Connect a room or cable antenna to the “FM radio” input at the
musicbox M
- Alternatively, you may also use a broadband cable connection
- Select the input
TUNER
Saving a radio channel
- Select the frequency of the radio channel to be saved
- Push the “Memory button” and the display will start flashing for
10 seconds
- Select the memory slot with the buttons “Preset –” or
“Preset +” within these 10 seconds (up to 30 channels can
be saved)
- Once the display stops flashing, the transmitter is saved on the
memory slot
Selection of the stored radio stations
- After initial selection of
TUNER
select the memory
slot of your previously saved station with the
buttons “Preset –” or “Preset +”
Versions of the display “Tuner” indications
Selection of the analogue input of the musicbox M
- Select the analogue input
LINE
as described in 1
Selection of the digital input of the musicbox M
- Select the digital input
DIGITAL
as described in 1
Memory function
Channel search
(keep pushed for auto-
matic search)
Channel search
(keep pushed for
automatic search)
Switching mono/
stereo playback
Memory slot
selection
Memory slot
selection
... by remote control
... by operating panel
Tuner operation
Channel search
(keep pushed for auto-
matic search)
Channel search
(keep pushed for
automatic search)
Memory slot
selection
Memory slot
selection
Tuner Stereo Mode
II 100,85
Tuner Mono Mode
I 100,85
Tuner Preset
PRE 10
TUNER RDS
SWR 3
Tuner fast forward
SEARCH››
Tuner rewind
SEARCH‹‹
English