User manual

36 37
CLEANING THE WHEELS AND SENSORS (1)
Wipe all the sensors and wheels with a soft dry rag or
similar.
CLEANING THE CHARGING STATION’S
TERMINALS (2)
Before cleaning, remove the charging station’s mains
adapter. Wipe the terminals with a soft dry rag or similar.
CLEANING THE SUCTION OPENING AND THE
DUST SENSOR (3)
Wipe the surfaces with a soft dry rag or similar.
EASY-FIT MOP (4) (Canvac Q Clean R450)
As shown in the figure, attach the self-adhering easy-fit
mop to the robot vacuum cleaner’s underside. Replacing
the mop when it is dirty is easy (mops are available from
your Canvac dealer).
NB! Guard the sensors from moisture and solvents – do not
wipe with anything wet!
REPLACING THE BATTERY (5)
a. Ensure that the robot vacuum cleaner is not connected
to the charger.
b. Put the robot vacuum cleaner’s power switch into
the OFF position
c. Undo the 2 screws in the battery hatch (refer to
the figure).
d. Lift out the battery and undo the contact.
1.
2.
3.
4.
5.
Battery lid