BRETON ARM CHAIR PRODUCT NO. 088-2184-2 ASSEMBLY INSTRUCTIONS Toll free: 1-888-670-6684 IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product, make sure all parts are present. Compare parts with packaging contents list. If any part is missing, or if you have any questions, contact the customer service department at 1-888-670-6684.
Made in China IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8
Important Safety Instructions 3 Parts List 4 Assembly 5 Cleaning and Maintenance 8 Technical Data 8 Warranty 9 TABLE OF CONTENTS 3 Caution! Always keep children under close supervision while they are using or around this product. Never leave children unattended. • • • • • • • • This product is intended for domestic outdoor use only. The product should be placed on flat, horizontal ground. Any assembly or maintenance of the product must be carried out by adults only.
PRODUCT NO.
CAUTION! • The maximum weight capaicty of the armchair is 225 lb (102 kg). Do not stand on the product. • Keep children away during assembly. This product contains small parts which can be swallowed by children. • Keep fingers away from the places where they can be pinched or trapped. • Do not attempt to assemble the armchair if any parts are missing. Let us help you! DO NOT RETURN YOUR PRODUCT TO THE STORE.
PRODUCT 4 NO. 088-2184-2 Note: Do not tighten screws all the way until you have assembled the armchair. Once assembly is complete, tighten each screw. ASSEMBLY Step 1 Requires part 3, 4, B, D Attach the seat panel 3 to the back panel 4 using the screws B with washers, aligning the holes. When assembled, tighten the screws with the hex key D.
Step 3 Requires parts 2, 3, 4, A, D ASSEMBLY Connect the left arm 2 to the back panel 4 using the screws A with washers; and then use the screws A with washers to connect the seat panel 3, aligning the holes. When assembled, tighten the screws with the hex key D. 4 A 3 2 Step 4 Requires parts 1, 2, 7, C, E Connect the plastic feet 7 to the right arm 1 and the left arm 2 using the nuts C with washers. When assembled, tighten the nuts with the wrench E.
NO. 046-3456-8 | MODEL NO. 088-163 PRODUCT NO. 088-2184-2 12 PRODUCT CAUTION! • Check all screws and nuts periodically for tightness, tightening them TECHNICAL DATA CLEANING AND MAINTENANCE again as required. • Clean the product with a slightly damp cloth and a little detergent. Let it dry thoroughly. • Do not use bleach, acid, or other abrasive cleaners on the arm chair or frame parts. Dimensions (L x W x H) 31 1/2 x 30 5/16 x 32 1/16" 80 x 77 x 81.5 cm Product weight 31 lb 14 oz (14.
This CANVAS product carries a one (1) year warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace a defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.