User Manual

10
ASSEMBLY
C
Step 5
Requires 3, 98
Carefully stand your unit upright.
Place your unit in its fi nal location against a wall. Locate the centre of a stud in your
wall near your unit and mark it with a pencil. Next, drill a 1/8” hole on the mark and
into the stud in your wall.
Fasten the unit to the wall. Use the LONG SCREW through the other end of the strap
and into the 1/8” hole.
Peel the APPLIQUES from the APPLIQUE CARD (3) and stick them onto each SCREW head
in the ENDS (C).
This completes assembly. Clean with your favourite furniture polish or a damp cloth.
Wipe dry.
MODEL NO. 168-0051-0
Drill this hole into
a stud in your wall.
3 98
C
To cover screws
(12 used)
35 lbs (15.9 kg)
25 lbs (11.3 kg)
50 lbs (22.7 kg) total
Use the LONG SCREW
through this end of the
strap and into the 1/8” hole.
3
25 lbs (11.3 kg)