HAMPTON COLLECTION Day Bed and Swing MODEL NO. 088-1934-4 Attention： Canopy is for temporary use as sunshade only. Please remove when not in use. ASSEMBLY INSTRUCTIONS Toll-free: 1-888-670-6684 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
MODEL NO. 088-1934-4 TABLE OF CONTENTS 2 Important Safety Instructions 2 Parts List 3 Assembly 5 Cleaning and Maintenance 12 Warranty 12 TABLE OF CONTENTS 2 Ensure that all parts are assembled properly and fully tightened as per the instructions. When placing in the desired location, ensure that all legs are resting on the same surface. You may adjust the legs levellers as required to ensure that the item stands in a rigid position.
PARTS LIST 3 1 17 Leg post - 4 Post base - 4 2 18 Side panel - 2 Base plate - 4 3 A Top crossbar - 2 M6*12 bolt - 8 + 1 spare 4 B Top crossbar - 2 M6*15 bolt - 4 5 C Top crossbar - 2 M8*20 bolt - 20 + 2 spares 6 D Canopy crossbar - 3 M8*75 bolt - 8 + 1 spare 7 E Rear crossbar - 1 M8*80 bolt - 2 8 F Left arm - 1 M6 metal washer - 4 9 G Right arm- 1 M8 metal washer- 30 10 H Front support bar - 1 M8 nut - 2 11 Rear support bar - 1 12 Seat and back - 1 13 Hanging bar
MODEL NO. 088-1934-4 Let us help you! DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST! 1-888-670-6684 If you have questions regarding your product, require warranty assistance, or have damaged or missing parts, please call our customer service toll-free helpline. Contact us for assistance; we’re here to help. IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product, make sure all parts are present. Compare parts with packaging contents list.
Step 1 ASSEMBLY Requires 1, 17, 18, A. Insert two bolts A through the base plate 18 and post base 17, and secure into the leg post 1. Tighten completely. Repeat procedure for the remaining three legs. Note:The side of base plate with sunk hole should be towards outside and the bolt should be level with the base plate. 1 1 A x8 17 Not actual size. 18 A A Step 2 Requires 1, 2, C, G.
MODEL NO. 088-1934-4 Step 3 Attach the top crossbar 3 to the leg 1. Insert a bolt D through a metal washer G, through the top crossbar 3 and secure into the leg post 1. Do not tighten completely. Repeat procedure for the remaining three legs. Note: The side with “inside” label should be towards inside for top crossbar 3. inside D x4 G x4 J 3 Not actual size. 1 D 1 1 G 1 1 3 Don’t use any bolt for this step Step 4 Requires 1, 3, 4, C, D, G.
Step 5 Requires 3, 5, C, G. ASSEMBLY Attach top crossbar 5 to the top crossbars 3. Insert a bolt C through a metal washer G, then through the bracket on the top crossbar 5, and secure into the top crossbar 3. Do not tighten completely. Repeat procedure for the other side and other top crossbar 5. C x8 G x8 5 Not actual size. 5 3 3 5 C G Step 6 Requires 3, 6. Attach the canopy bar 6 to the top crossbar 3. Insert the canopy bar 6 into the holes on the top crossbar 3.
MODEL NO. 088-1934-4 Step 7 Place the rear crossbar 7 between the side panels 2. Insert a bolt B through a metal washer F, through the rear crossbar 7, and secure into the side panel 2. Do not tighten completely. Repeat procedure for the other side. Tighten all bolts from step 1 to step 7 by using the wrenches provided. Note:The side with “inside” label and “U”shaped brackets should be towards inside for the rear crossbar 7. B x4 F x4 K 2 F 2 L 7 B 2 M 7 Not actual size.
Step 9 Requires 8, 9, 12, E, G, H, I, K, M. E x2 H x2 G x2 I x2 H G I 12 K 9 8 M E 12 Not actual size. FRONT ASSEMBLY Unfold the seat and back 12 and lay it on top of the assembled frame. Line up the holes. Insert a bolt E (from outside to inside) through the bracket of the arm, through a plastic washer I, through the side bar on the seat and back 12, through a metal washer G and secure with a nut H. Do not tighten completely. Repeat procedure for the other side.
MODEL NO. 088-1934-4 Step 11 First, set the hanging bars 13 into “S” hook. Note: the side with “TOP” label towards “S” hook. Then the other ends of hanging bars into the pin of the arms. Repeat procedure for the other remaning two hanging bars. Second, hang the assembled body on the top crossbars 5. Third, secure the lawn stack N into the ground. Repeat procedure for the other three post legs. N x 16 J x2 Not actual size.
Step 13 Requires 1，14, 15. Insert the canopy side bar 15 into the canopy 14 as per drawing. Fasten the ties attached to the canopy 14 to each leg post 1. ASSEMBLY 14 14 15 1 15 Step 14 Requires 7, 11, 12. To convert the swing into a hanging bed, first push down the pin on rear support bar 11. Second take out the back support tube from U-shaped bracket on the rear support bar. Repeat procedure for the other side.
MAINTENANCE WARRANTY 12 MODEL NO. 088-1934-4 • Though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches, lightly sand the affected area and apply touch-up paint. To maintain the finish, periodically apply wax with a soft cloth. • Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use bleach or solvents.
