CANVAS RENNIN SMALL SPACE SOFA PRODUCT NO. ASSEMBLY INSTRUCTIONS Toll free: 1-888-670-6684 IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product, make sure all parts are present. Compare parts with packaging contents list. If any part Is missing, or If you have any questions, contact the customer service department at 1-888-670-6684.
Important Safety Instructions 3 Par List 4 Assembly 5 Loaning ant Maintenance 4 Technical Data 8 Warranty 2 How to Use 10 Warning! To reduce the risk of serious Injury, read the following safety instructions before assembling and using the sofa. Caution! Always keep children under close supervision while they are using or around this product, Never leave children unattended. This product Is Intended for domestic outdoor use only. The product should be placed on flat, horizontal ground.
PARIS LIST 4 PRODUCT NO, 088-22335-6 Back panel 1 Screw M8X40 2 0 Set panel -1 Screw MEX -10 Connecting bar -2 Screw M6X20 Front leg washer 18 Right arm -1 £ M8 washer 2 Seat cushion -1 M6 Hex key 1 K Back cushion 2 M8 Hex key -1 & M8 screw cap 2 M@ screw cap 18
CANVAS ° CAUTION! * The maximum weight capacity of the sofa is 225 b (102 kg) per seat. Do not stand on the product. ¢ Keep children away during assembly. This product contains small parts which can be swallowed by children. * Keep fingers away from the places where they can be pinched or trapped. « Do not attempt to assemble the sofa if any parts are missing. Let us help you! & DO NOT RETURN YOUR PRODUCT TO THE STORE.
ASSEMBLY PRODUCT NO, 088-22335-6 Note: Do not tighten screws all the way until you have assembled the sofa. Once assembly is complete, tighten sate screw. Step 1 Requires part 1, 3,4,C,D, F, | Connect the back panel 1 and the front leg 4 with two connecting bars 8 using the screws €, M& washers I and M8 screw caps |, aligning the heels. When assembled, tighten the screws with the M6& hex key F.
CANVAS Step 3 Requires parts 5, A,E, H, G Attach the right arm 5 to the back panel 1 and the front leg 4 using the screws A, M8 washers E and M8 screw caps H, aligning the holes. When assembled, tighten the screws with the M8 hex key €. Ensure the arm is positioned correctly as shown in the inset. Step 4 Requires parts 6, 7 Turn the sofa to its upright position, and place the seat cushion 8 onto the sofa. Secure the cushion to the sofa.
£ PRODUCT NO, 088-2233-6 é CAUTION! « Check all screws and nuts periodically for tightness, tightening them again as required. + Clean the product with a slightly damp cloth and a little detergent. Let it dry thoroughly. » Do not use bleach, clad, or other abrasive cleaners on the sofa or frame parts.
CANVAS ° This CANVAS product carries a one (1) bear warranty against defects in workmanship and materials, Laetrile Distribution agrees to replace a defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
