STELLAN 3-LIGHT PENDANT MODEL NO.052-8385-2 ASSEMBLY INSTRUCTIONS IMPORTANT: Please read this manual carefully before attempting to assemble, operate or install the product, and save it for reference.
Package and Hardware Contents Important Safety Instructions Assembly Preparation Assembly Instructions Care and Maintenance/Troubleshooting Warranty 2 3 3 4 6 6 PART A Package and Hardware Contents Table of Contents 2 DESCRIPTION Fixture Body QUANTITY 1 A AA Mounting Bracket Qty. 1 BB Outlet Box Screw Qty. 2 CC DD Mounting Wire Connector Screw Qty. 3 Qty.
CAUTION The following rules must be adhered to when assembling the product. If you have any doubts about how to install the product or if it fails to work properly, contact a local, licensed electrician. Failure to comply with these requirements could lead to an electric shock or fire, which could cause serious injury or fatality. Ensure: Power at the main fuse box is disconnected before installing the fixture. The fixture ground wire (bare or green insulated wire) is NOT connected to current-carrying wires.
Assembly Instructions 4 1. MODEL NO.052-8385-2 Attach the mounting bracket (AA) to outlet box (not included) using the outlet box screws (BB). 1 AA BB 2. Strip 3/4” (19 mm) of insulation from fixture wire ends. Twist stripped ends together with pliers (not included). Connect the white wire from the fixture with the white wire from the outlet box. Connect the black wire from the fixture to the black wire from the outlet box in same manner. Snip ends.
4. Install the bulbs. Use 3 x 60 W (max.) type A lamps (not included).
MODEL NO. 052- 8385-2 CARE AND MAINTENANCE Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers. Bulb replacement: Use 3 x 60 W (max.) type A lamps or equivalent CFLs. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE Bulb won't light. 1. Bulb is burned out. 2. Power is off. 3. Faulty wire connection. 4. Faulty switch. Fuse blows out or 1.Crossed wires or power circuit breaker trips wire is grounding out. when light is turned on. CORRECTIVE ACTION 1.
