User`s manual

Introduction

• Automatic chassis fan and second fan on/off control

• Read back capability that displays temperature, voltage and fan

speed

• Opened chassis alarm

Refer to the “PC Health Status” section in chapter 3 and the

“Hardware Monitor” section in chapter 4 for more information.

1.1.3 Intelligence

Automatic Chassis/Second Fan Off

The chassis fan and second fan will automatically turn off once

the system enters the Suspend mode.

Dual Function Power Button

Depending on the setting in the “Soft-Off By PWR-BTTN” field of

the Power Management Setup, this switch will allow the system

to enter the Soft-Off or Suspend mode.

Wake-On-Ring

This feature allows the system that is in the Suspend mode or

Soft Power Off mode to wake-up/power-on to respond to calls

coming from an external modem or respond to calls from a

modem PCI card that uses the PCI PME (Power Management

Event) signal to remotely wake up the PC.

Important:

If you are using a modem add-in card, the 5VSB power source

of your power supply must support a minimum of

≥

720mA.

Wake-On-LAN

This feature allows the network to remotely wake up a Soft

Power Down (Soft-Off) PC. It is supported via the onboard LAN

port, via a PCI LAN card that uses the PCI PME (Power Manage-

ment Event) signal or via a LAN card that uses the Wake-On-

LAN connector. However, if your system is in the Suspend mode,

you can power-on the system only through an IRQ or DMA

interrupt.