User manual

EN - 17
the network. Select a router device and click on Delete to remove it from table.
4. Click on Save to save modified settings.
Advanced
1. This section adjusts advanced wireless function.
2. Type in the Beacon Interval between each beacon broadcast. A beacon is a
packet broadcasted by the device to assist in network synchronization. The
default value is 100.
3. Type in RTS Threshold value as desired between 256 and 2432. The default
value of 2347 should only be modified when encountering inconsistent data flow.
4. Type in DTIM Interval frequency between each DTIM (Delivery Traffic
Indication Message) broadcast. Lower value result in more efficient networking
while preventing PC(s) from entering power saving mode. Higher value
interferes with wireless transmission yet allowing PC(s) to enter sleep mode thus
saving power consumption.
5. Select maximum Transmit Rate (Transmission rate of data packets)of the
device. The default value is Auto.
6. Select Preamble Type (Length of CRC block in the frames during wireless
communication). Short Preamble is appropriate for heavy traffic wireless
network while Long Preamble provides better communication reliability.
7. Select 802.11g Protection type between CTS, RTS/CTS, or disabled.
8. Click on Apply to confirm modification.
9. Click on Save to save modified settings.