Canyon Multimedia MP3 Player Article: CNR-MPV4x You can press “RESET” button to recover the default setting if MP3 player is not functioning well.
For your safety ─ Read this user guide carefully to ensure proper use of the product and to avoid any danger of physical damage.
Accessories in the packing NOTE: The following icons are only a guide and may slightly differ from the actual product appearance.
Function Features 1. Support USB2.0 high speed, much faster than USB1.1, to enable faster communication with your PC. 2. Once full charge, the Li-polymer battery can playback audio files continuously for 30 hrs and video files for 3 hrs 3. You can select your favorite music by artist, album, general, also you can make your own play list. 4. Supports various EQ mode, including normal, PoP, Rock, Classical, Jazz 5. Support multiple languages, like English, Italian, French, etc. 6.
Components and Button functions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Button Definition Turn power on/off Press and hold to turn power on/off Play/Pause/Confirm Press to play/pause/confirm < > Previous one/Backward Next one/Forward Press to turn to previous one/next one In playback mode, press and hold for backward/forward ∧∨ Adjust the volume Press to turn up/turn down the volume REC/A-B Record ( for MPV41 only)/A-B repeat Short press for A-B repeat ( for MPV41 only)Press and hold to start to record MENU Menu button Press to return to system menu 6
HOLD button In “Audio Playing”, “FM Tuner”, “Video”, “Recording (for MPV41 only)” mode, all buttons are disabled if you switch HOLD button to “LOCK” position. This is helpful when you are doing sports, like walking, jogging, etc. Note: The HOLD button is disabled in “Settings”, “Browse”, “Text reader”, “Album” modes. RESET hole & Microphone( for MPV41 only) You can reset the system setup of your MP4 player by pressing the RESET hole.
Screen Display Contents NOTE: The following picture is only for your reference.
Charging Li–Polymer battery safely 1. 2. 3. 4. Connect the PC USB port and the MP3 player USB port with the provided USB cable, At this time the screen of your player will display: READY The charging time is approximately 3 hours, and the discharge time is 30 hours when playback audio files, 3 hours when playback video files. The unit could not be used during charge. To stop recharging, disconnect the USB cable. Notes 1. Before your first time use, please recharge your MP3 player. 2.
Basic operations Turn power on Connect earphones to earphone jack and switch HOLD button to unlock position, then press button to power on, it will display Audio Playing mode automatically. NOTE: The player will power off automatically after a preset period of time in pause mode (Default time is 2 minutes). You can select the system menu by touching【< >】switch: Audio Playing, Browse, Recording( for MPV41 only), Album, FM Tuner, Settings, Video, Text reader. Turn power off button to turn off the player.
NOTE 1. You must add music files into the play list before you can listen to them. 2. You can browse the pictures or read TXT files stored in the player or setup some parameters of your player while playing music. Volume Adjustment In Audio playing, playback video files, or tuning FM radio mode, you can touch【∧∨】 switch to turn up/turn down the volume. Adding/Removing files/folders – you can use the player as a removable USB storage.
3. Delete MP3 files from the removable USB storage (use the "Delete" command). Remove the player from PC – please follow the steps in case of damaging the player or data loss. 1. 2. 3. Click the icon on the taskbar at the bottom right corner of the desktop. Click the "Safely remove USB Mass Storage Device – Drive (G:)" column. Disconnect the player from your computer.
CAUTION: 1. Do not remove the player while files within the USB Mass Storage are being played on your computer. 2. Do not disconnect the player from your computer while transferring files, or it will cause damage to the player or data loss. If your PC has installed Windows Media Player 10, your player will be in MTP mode while connected with your PC, so you can add/remove files or folders as following methods: 1.
2. Open the “MTP Device” in your computer ⑴ Add Media files into the “Media” folder, add other type of files into the “Data” folder.
Note: You can only add media files into the “Media” folder, if you add other type files into the “Media” folder, your PC will display: 17
⑵ The other type of files can not be opened after copying to “Data” folder.
Browse 1. Press MENU button to return to main screen. 2. Touch【< >】switch to select , switch to enter into. then touch 3. Touch【< >】switch to select / / / / / / ( for MPV41 only) / / / /
Recording ( for MPV41 only) 1. 2. 3. 4. 21 Press MENU button to return to main screen. Touch 【 < > 】 switch to select , then touch switch to start to record. Press REC/A-B button to pause. Press MENU button to save and exit this recording.
Album 1. 2. 3. Press MENU button to return to main screen. Touch 【 < > 】 switch to select , then touch switch to enter into. switch again to browse Touch the photos automatically, or Touch【< >】switch to browse one by one. 4. Press MENU button to exit. Note: the player supports JPEG format photo files.
FM Tuner 1. Press MENU button to return to main screen. 2. Touch【< >】switch to select , then touch enter into. 3. Touch【< >】 switch to adjust the FM frequency at interval of 0.1MHz. Press and hold REC/A-B button to start to FM recording (for MPV41 only). 4. Note: If you open the speaker while tuning FM radio, you also need to connect the earphones to earphones jack.
Setup Parameters 1. Press MENU button to return to main screen 2. Touch 【 < > 】 switch to select switch to , then touch enter into. Touch【 < > 】switch to select the parameters then setup. After setup, save your choice by switch. touching 3. 4. Brightness In the Settings menu, select and enter by touching touch【< >】switch to adjust the screen brightness . switch to save and exit.
Power Save Select in the Settings menu and enter by touching switch, then touch【< >】 switch to select / / and start to set. switch to save and exit.
Graphic EQ 1. 2. 26 Select < Graphic EQ > mode in the Settings menu and enter by pressing button, then touch【< >】 switch to select the EQ mode / / / / . Press MENU button to save your setting and exit.
Play Mode In the Settings menu, Select and touch switch to enter, then touch 【< >】switch to set the repeat mode. switch to save, and press MENU button to exit. Touch Slides Interval In the Settings menu, Select and touch switch to enter, then touch【< >】switch to set the time interval . Touch switch to save your setup and exit.
Record Settings ( for MPV41 only) Select ( for MPV41 only) in the Settings menu and touch switch to enter, then touch【< >】switch to select / / / / / / 28
Format Drive Select in the Settings menu and touch button to select / switch to confirm. Touch switch, then touch【< >】 Language Select mode and enter by touching button, then touch【< >】switch to select your own language . Touch switch to save your choice and exit.
Video playing In order to play video files in your MP3 player, you must change the video files into AVI or WMV format with the video converter tool, please download the video Converter tool from the following website: http://www.mediacoder.cn/download.htm 1. 1) Download the video converter tool from the website. Click “http://www.mediacoder.cn/download.
2) 3) Select “0.5.
2. After download, install the Media Coder on your own computer. 1) Double click “MediaCoder-0.5.
3) Click “Next>” 33
4) Click “I Agree” and enter next step.
5) Select the install location (please select the default install location) 35
6) Click “Install” to enter next step.
7) Click “Finish”, it will display the MediaCoder shortcut icon on the desktop.
3. Use the Video Converter tool to convert the video files into AVI format. 1) 2) Click MediaCoder in the desktop. Click “File” and select “Add File” to add video files that you hope to convert.
3) Select the output folder.
4) Before converting, you should set the following parameters: 42
1. Bit rate: 500Kbps 2. Resize: 320x240 3. Codec: MPEG4/WMV9 4.
Playback video files as following steps: 1. Press MENU button to return to main screen. 2. Touch 【 < > 】 switch to select switch to
Text reader (E-book) 1. Press MENU button to return to main screen. 2. Touch【< >】 switch to select , then touch enter into. 3. Touch【< >】switch to select one of the TXT files stored in the player. Touch switch to read the txt file. 4. Note: 1. The player only supports TXT format files in the Text reader. 2. You can read the TXT files while listening to music.
Player 10 and link both applications. This allows the downloaded music file to then be used on a separate digital music player. How to synchronize the DRM songs into your MP3 player? 1. Purchase DRM songs from the internet, and download them into your computer. 2. Playback the songs that you downloaded, if it could be played, the download is successful, or you need to download again. 3.
5. Click “OK” to start synchronization, your PC will display: 6. Select “Manual” or “Automatic” as your requirement, for example, select ”Manual” and click “Finish”.
7. Add the songs that you want to synchronize into the sync List. 8.
9.
10. The dexter frame will display the synchronized songs.
Technical Specification No. 9 FM 10 File System Description Support Micro SD/T-Flash Card, up to 2G; Build-in Flash Memory, up to 8G. USB2.0 (High Speed) 2.4’ TFT 240x320 Li-Polymer ≥85dB 20hz – 20khz NORMAL, POP, ROCK,CLASSIC, JAZZ MP3/WMA/WAV/OGG/AAC/WMV/AVI/JPG 87.50 ---- 108.
