User's Manual

Tune the sensitivity and responsiveness of the motion sensor to suit your application. In motion detection mode,
choose to remember moved state indefinitely or reset to armed state after a while. In door/gate mode, choose
the threshold angle (23 degree is recommended for automatic garage doors, 2~5 degree for regular doors), or
choose to get notified only when door is opened for too long.
Choose to get notified by emails, tweets, speech, or whether to make tag beep upon motion.
Set the schedule to automatically arm or disarm the motion sensor at certain time of the day, and days of the
week.
Sensitivity/Responsiveness
Notification Settings
Click the "Options..." button to
open Motion Sensor Optinos
screen for an individual tag.
You can choose sensitivity (0 to
100, 50 is recommended to
eliminate false alarms in most
environment), and
responsiveness ("Slow" is 12x the
delay and battery life of "Fast")
that best suit your application.
When door/gate mode is
enabled, you can choose the
threshold angle, when tag
orientation changes more than
this, the door is deemed open,
when tag orientation returns
within this threshold, it is
deemed closed.
When not in door/gate mode,
after movement is detected, by
default the system remembers
the tag has been moved
When in door/gate mode, you
can choose to be notified only
when it is been open for longer
than a certain time period.
You can choose to be notified by
email, have the system post a
tweet on your Twitter account,
beep or speak on your phones,