Stand & Charge USB Charging Station with Dual Alarm Clock Charge 3 mobile phones, tablets & digital cameras including iPhone, iPod, iPad and Android devices Keeps cables organized CR220 user guide
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAFETY PRECAUTIONS a. Do not expose this unit or the AC/DC adaptor to dripping or splashing water. Keep liquid-filled objects such as vases, away from this unit and AC/DC adaptor. b. To ensure that this unit is completely disconnected, unplug it from the wall. c. Ensure that the AC/DC adaptor is easily accessible. d. Please note the information printed underneath the unit. e. Batteries should not be exposed to excessive heat such as direct sunshine, fire, etc. f.
inside the box CR220 Digital FM clock radio, AC power adapter, user guide, a set of cable spool and cable clip. power source ac connection AC outlet Insert the small end of the AC adaptor into the DC In Jack (located on the rear of the unit). Connect the other end to a wall outlet providing 100-240V AC, 50/60 Hz. The output of the provided AC/DC Adaptor is DC 5V 3A. notes: Disconnect both ends of the power cord when not in use.
inserting batteries Two (2) ‘AAA’ size batteries are used to back-up the clock, alarm time and preset memories if the AC/DC adapter is disconnected or there is a power failure. Open the battery door by pushing in on the tabs, then removing the door. Insert two (2) ‘AAA’ batteries as shown. Alkaline batteries are recommended for the longest playing time. Replace the battery door back on the compartment. Size ‘AAA’ 1.5V Size ‘AAA’ 1.
location of controls 12 11 13 15 Power Button Alarm 1 Button Alarm 2 Button Preset Button LCD Display Snooze Button Volume / Brightness Down Button Volume / Brightness Up Button Tuning Down / Min Button Tuning Up / Hour Button Triple USB Charging Ports 3.
location of controls (con’t) Battery Compartment DC Power In Jack Wire Antenna LCD display 1 2 7 PRESET 3 4 1 2 5 8 9 10 FM AM PM 6 DST 11 Low Battery Preset Snooze Alarm 1 Alarm 2 PM AUX In Buzzer FM radio AM DST (Daylight Savings Time)
playing the radio Press the POWER BUTTON to switch the unit ON. There are multiple methods to select the station of your choice. Preset tuning mode: Press the PRESET BUTTON repeatedly to select the desired preset (P01 to P10). Scanning mode: Press and hold < or > to scan through the frequency bands; scanning starts from the currently-tuned station and stops when a station is received. Manual tuning mode: Repeatedly press TUNE < or > to manually move through the frequency bands.
3 X triple USB charging ports This unit includes three USB ports placed inside the Cover (see"location of controls"). The USB ports support powering and charging most devices including iPhones, iPads, iPods, Android devices, E-readers, digital cameras and more. (USB cables sold separately). One of USB port supply 5V/1A quick charging (see " location of controls" 11c). The other two USB ports supply 5V/0.5A charging (see "location of controls" 11a&b).
setting the alarm Press & hold the ALARM 1 or ALARM 2 BUTTON, the alarm time will flash. Press > to set the hour and press < to set the minute. Press the ALARM 1 or ALARM 2 BUTTON to confirm the alarm time setting. Press < or > to select the desired alarm source: Radio or Buzzer. Press the ALARM 1 or ALARM 2 BUTTON to complete alarm sett ing. The ALARM 1 or ALARM 2 indicator will appear on the display. To stop and deactivate the alarm, press the ALARM 1 or ALARM 2 BUTTON briefly.
setting the clock Plug in the unit. Press and hold the CLOCK SET BUTTON until the clock flashes in the display. Press the TUNNING UP / HOUR BUTTON repeatedly to set the hour and press the TUNNING DOWN / MIN BUTTON repeatedly to set the minute. Press the CLOCK SET BUTTON again to store the new clock setting. select daylight savings time To activate the daylight savings time (summer time) adjustment, press the DST BUTTON.
select your time zone Press the TIME ZONE BUTTON. By default, area number “02” is displayed. If you live in the Eastern Standard Time zone, you do not need to adjust the setting.
aux-in connection Insert one end of the 3.5mm audio cable (not included) into the LINE OUT jack on your external audio device (e.g. iPad, iPod shuffle, mobile phone, MP3 player, digital media player, etc.) and the other end into the LINE IN jack on the unit. To listen to the external audio unit, turn this unit on using the POWER button and turn on the external audio unit. The unit will automatically switch to AUX mode when Line in audio cable is plugged in to the unit.
? troubleshooting symptom cause solutions No Sound Volume is set to minimum. Increase volume. Power is not on. Press the power button to turn the power on. Volume is set to minimum. Increase volume. Station is not tuned properly. Retune the FM broadcast station. FM: Wire antenna is not extended. Extend FM wire antenna. Incorrectly connected. Check the connection. Volume is set to minimum. Increase volume. Batteries connected improperly, not connected or dead. Check the batteries.
For further assistance, please visit our website: hellocapello.com or contact customer service at support@capelloproducts.com or 1-855-896-1795 Life Lab International Ltd.
