User's Manual

[PWD] + [PROG] + [7] + [d]
1=10sec
2=20sec
3=30sec
4=40sec
5=50sec
Default = 2
Program delay duration
[PWD] + [PROG] + [8] + [d]
Entry/Exit delay
1=instant, enter arm mode instantly.
2=10sec, 3=20sec, 4=30sec, 5= 40sec
Default is 1
Program pager pause
[PWD] + [PROG] + [9] + [d]
User can only enter 1 pager pause in phone no.
1=1sec, 2=2sec,……, 9=9sec
Default is 5sec
Program dial sequence setting
The dialer can dial the preprogrammed phone numbers in two different sequences.
[PWD] + [PROG] + [0] + [d]
Dialing sequence
1= Dial each phone number once, then repeats sequence.
2= Finishes dialing first phone number, then begins the second number.
Default is 2
Standby mode
AD105 shows “not rEAdy” in the LCD display, user has to check
1. The main message is recorded properly
2. One of the Telephone no. is entered.
AD105 is ready to dial emergency when the LCD display shows “rEAdy”.
Arm the dialer
[MPIN] + [ARM]
Arm LED will goes on.