User's Manual

Skylink Remote Control Model : MKA-315 PRELIMINARY COPY

1. INTRODUCTION

In this package, you will find a Skylink Remote transmitter with 3V lithium battery. The

Remote transmitter allows you to operate the Skylink’s receiver.

There are four buttons on the transmitter MKA-315, each button can be programmed to

control Skylink receiver.

2. PROGRAM THE TRANSMITTER TO RECEIVER

In order for the remote control to communicate with the receiver, the transmitter must be

programmed to the receiver. Follow the brief instructions below to program transmitter to

the receiver you want to control.

Refer to the receiver user’s instructions to set up the unit.

1. Press the Learn button on the receiver unit.

2. Once the learn button is pressed, the receiver LED will flash quickly. Release the

Learn button.

3. Press any one of the 4 buttons on the transmitter that you want to program to the

receiver

4. Once the transmitter is programmed, the receiver LED will flash slowly.

5. You may now operate the receiver with this new transmitter.

3. OPERATION

Press the button for 1 second and release, this will activate the “learned” Skylink

receiver(s).

4. BATTERY

The remote control operates on one 3-volt lithium battery that is installed at the factory.

Dispose of used battery properly according to the instructions.

5. WARRANTY

If, within one year from date of purchase, this product should become defective (except

battery), due to faulty workmanship or materials, it will be repaired or replaced, without

charge. Proof of purchase is required.

6. FCC statement

The device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the product.

7. IC

This device complies with Industry Canada licence-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) this device may not cause interference, and

PAGE 1
Skylink Remote Control Model : MKA-315 PRELIMINARY COPY 1. INTRODUCTION In this package, you will find a Skylink Remote transmitter with 3V lithium battery. The Remote transmitter allows you to operate the Skylink’s receiver. There are four buttons on the transmitter MKA-315, each button can be programmed to control Skylink receiver. 2. PROGRAM THE TRANSMITTER TO RECEIVER In order for the remote control to communicate with the receiver, the transmitter must be programmed to the receiver.
PAGE 2
(2) this device must accept any interference, including interference that may cause undesired operation of the device. 8. CUSTOMER SERVICE If you would like to order Skylink’s products or have difficulty getting them to work, please : 1. visit our FAQ section at www.skylinkhome.com, or 2. email us at support@skylinkhome.com, or 3. call our toll free at 1-800-304-1187 from Monday to Friday, 9am to 5pm EST. Fax (800) 286-1320. SKYLINK TECHNOLOGIES INC.