Datasheet

▲
Disconnect the display panel cable from the webcam, and then remove the cable on the left side
up to the left hinge.
Webcam assembly
Description Spare part numbers
Webcam assembly 686587–001
Before removing the webcam assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page 31).
5. Remove the base enclosure (see
Base enclosure on page 33).
6. Disconnect the battery cable (see
Battery on page 35.
Remove the webcam assembly:
66 Chapter 4 Removal and replacement procedures