Owner's Manual

34
CLEANING CHART:
Always start by selecting the mildest cleaner according to the kind of soil and the material soiled. To prevent marring the
stainless steel finish, always apply the cleaners in the direction of the grain. Rinse and dry immediately to avoid water
marks.
Use clean applicators, i.e. soft cloths, sponges, or paper towels for cleaning and scouring.
The use of brand names in the chart is intended only to indicate a type of cleaner. This does not constitute an
endorsement. The omission of any brand name does not imply its inadequacy.
The brands listed on the chart are suggested as examples of a type of cleaner, such as non-abrasive, powder, cream,
etc., use all products in accordance with the manufacturer’s instructions.
PART / MATERIAL
/ SOIL CONDITION
SUGGESTED CLEANERS
IMPORTANT REMINDERS
Outer glass surfaces
Non-Abrasive window cleaner, all purpose
cleaners
Abrasive cleaners may leave scratches
over time
Always use clean dry cloths for best
results
Inner Door Glass
Hot sudsy water. Rinse and dry thoroughly
Inner windows have a heat reflective
coating that will scratch if abrasives are
used
Non-Abrasive window cleaner, all purpose
cleaners
Always use clean dry cloths for best
results
Exterior Stainless
Steel
Non-abrasive cleaners; hot water and
detergent, diluted ammonia, Fantastic®,
Formula 409®. Rinse and dry immediately
Always rub lightly in the direction of the
grain lines
Cleaner polish. Stainless Steel Magic® to
protect the finish form staining and pitting;
enhances appearance
Interior porcelain
surfaces
Hot sudsy water. Rinse and dry thoroughly
Remove all residue from oven by wiping
with a clean wet sponge after cleaning
Non-abrasive cleaners; hot water and
detergent, diluted ammonia, Fantastic®,
Formula 409®. Rinse and dry immediately
Interior glass surfaces
Hot sudsy water. Rinse and dry thoroughly
Remove all residue from oven by wiping
with a clean wet sponge after cleaning
Non-abrasive cleaners; hot water and
detergent, diluted ammonia, Fantastic®,
Formula 409®. Rinse and dry immediately
Heavy soiling may be lightly scraped with a
razor.
Always use extreme caution when
handling sharp tools
Oven Racks
Hot sudsy water. Rinse and dry thoroughly
Remove from oven for cleaning. Take
care to prevent paste or powder cleaners
from getting into roller bearings
Lightly abrasive cleaners; hot water and
detergent, diluted ammonia, Fantastic®,
Formula 409®. Rinse and dry immediately
Scrub with a lightly abrasive sponge or
cleaning products to remove heavy
staining