CAPITAL COOKING EQUIPMENT MAESTRO WARMING DRAWER INSTALLATION INSTRUCTIONS MODEL: MWD30EST
SPECIAL MESSAGE TO CUSTOMERS Dear Valued Customer, Congratulations on making a smart choice! You have joined an elite group of cooking enthusiasts who demand only the very best from their appliances. A Capital Cooking appliance promises years of enjoyment and maximum pleasure, allowing cooks everywhere to create culinary memories that last a lifetime. Because of the unique features found in our appliances, we urge you to read this manual thoroughly before installation and use.
TABLE OF CONTENTS SPECIAL MESSAGE TO CUSTOMERS................................................................................................................... 2 TABLE OF CONTENTS............................................................................................................................................. 3 WARNINGS AND GENERAL SAFETY ..................................................................................................................... 4 MODELS:................................
WARNINGS AND GENERAL SAFETY GENERAL SAFETY PRECAUTIONS: To reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow basic safety precautions, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Read the provided use and care manual before operating this appliance. Keep packaging materials away from children. Plastic sheets and bags can cause suffocation.
MODELS: Model number: Maestro Series 30” Warming Drawer: MWD30ES Product Dimensions: MWD30EST A B C D E F SIZE 10 23-3/16 9 29-3/4 27-3/8 3/4 -5-
PLANNING THE INSTALLATION 1. Plan the intended installation location by verifying that sufficient cabinet size and clearances are available. 2. Check that electrical power is available or can be established at the installation location and that all local codes can be met. 3. To provide the optimal operation of your appliance, the Warming Drawer should be installed in a location that will minimize drafts created by doors, windows, ventilation outlets, etc. 4.
WARMING DRAWER DIMENSIONS CAPITAL WARMING DRAWER MWD301ES 10” 23-3/16” 24” MODEL NUMBER "A" DIMENSION "B" DIMENSION CABINET DEPTH OVERALL WIDTH “D” DIMENSION OVERALL HEIGHT OVERALL DEPTH TO CABINET FACE OVERALL DEPTH TO DOOR FRONT 29-3/4” 28-9/16” 23-3/4” 25” 75 lb. PLATFORM SUPPORT WEIGHT Note: Cabinets must be manufactured to support the listed shipping weight of the product.
UNPACKING AND HANDLING 1. Move the Warming Drawer as close to the point of installation as possible prior to removing packing materials to prevent damage. 2. Remove all packing materials from inside the Warming Drawer and any protective plastic on the outside of the Warming Drawer. 3. Read and retain all instructions before installation and use and after installation as a reference. 4. The units are heavy. Plan sufficient manpower and use caution when lifting the unit.
INSTALLATION INTO CABINET WARNING: The Warming Drawer is very heavy. Utilize sufficient manpower to lift the Warming Drawer into the required opening to prevent injury. A minimum of two persons is recommended. IMPORTANT: The door(s) must be removed prior to installation in the cabinet. This will prevent damage to the doors and reduce the weight of the Warming Drawer for installation. 1. Verify that all cabinet and electrical preparations have been completed and meet the requirements of these instructions.
INSTALLATION CHECKLIST F All packaging materials have been removed from Warming Drawer and Warming Drawer surfaces. F External wiring and breakers or fuses meets local codes and requirements of these installation instructions. F Cabinet cutouts and platform support capacity have met the requirements of these installation instructions. F Plug Warming Drawer into approved grounded and dedicated outlet. F Install Warming Drawer into cabinet.
WARRANTY • One (1) year full parts and labor, covers the entire unit. WILL PAY FOR: All repair labor and parts found to be defective due to material or workmanship for on (1) full year (from date of purchase) “in home” WARRANTY. This does not apply if the unit was subjected to other than normal household use. An Authorized Factory Agency must provide Service during normal working hours.
NOTES: - 12 -
THESE SPECIFICATIONS ARE FOR PLANNING PURPOSES ONLY. CONSULT WITH AN AUTHORIZED TECHNICIAN FOR YOUR SPECIFIC INSTALLATION DETAIL REQUIREMENTS. FOR THE MOST UP TO DATE INFORMATION, CONTACT CAPITAL COOKING EQUIPMENT, INC. INDICATING THE MODEL NUMBER. WE RESERVE THE RIGHT TO CHANGE THESE SPECIFICATIONS OR DESIGN WITHOUT NOTICE. THE POWER OF PERFORMANCE TM Capital Cooking Equipment, Inc. 13211 E. Florence Ave. Santa Fe Springs, CA 90670 USA 866.402.4600 Toll Free 562.903.1167 Fax MADE IN USA www.
