Cannon, VEAM, BIW A Historical Achievement of Technology Leadership Defining and Championing Innovation Showcasing a portfolio of creativity, ITT’s “Engineered For Life” execution embraces products which have become ubiquitous in a broad collection of markets including: Military/Aerospace, Civil Aircraft, Industrial Instrumentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer, Consumer, and Automotive.
ITT Interconnect Solutions ITT Interconnect Solutions is a division of the multinational ITT Corporation, a $11.6 billion dollar global enterprise representing the brands Cannon, VEAM, and BIW. Our connector portfolio remains the most extensive in the industry offering the most reliable and cost effective range of interconnect solutions.
VEAM PowerLock PowerLock Applications The VEAM PowerLock connector series for field installation power distribution systems offers the ultimate in safety and reliability under the most severe operating conditions. PowerLock is available in four standard formats which allow complete hook up through the standard daisy chain principle. There are two Source connectors, one for panel mounting and one for cable attachment. These are identified as Panel Source and Line Source.
VEAM PowerLock PowerLock Applications We offer a wide variety of devices for electricity supply companies. Fuse carriers with integrated PowerLock connectors provide a safe and efficient connection to a power distribution board. Insulated rotary clamps provide a compact connection to a slotted busbar. Insulated G-Style clamps for direct connection to a live low voltage busbar. www.ittcannon.
In addition to our PowerLock series, we also offer these connectivity solutions: Harsh environments Cannon APD Cannon CA-Bayonet In-line and bulkhead connectors resistant to harsh environmental conditions (contaminants, vibration and shock). Signal and power connectors with exceptional sealing against the ingress of fluids and will withstand the effects of high vibrations. Audio VEAM CIR-LK Quick coupling and uncoupling. High impact heavy duty coupling mechanism.
VEAM PowerLock Table of Contents Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 ITT Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 PowerLock locking system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Specifications . . . . . . . . . . . . . . . . . . . . . .
Introduction VEAM PowerLock ITT Veam PowerLock connectors are plastic bodied single pole electrical connectors used in high current applications. For use in single and polyphase power distribution systems up to 660 amps, the range includes panel and cable mounted connectors, and associated accessories. PowerLock connectors are moisture and impact resistant and feature insulated contact tips to prevent accidental touching of electrically live parts.
VEAM PowerLock Connector locking PowerLock connectors feature a bayonet coupling mechanism with a secondary locking pin. When a pair of connectors are mated and fully turned to engage the bayonet, the spring loaded secondary locking pin on the Drain connectors, snaps into a slot on the Source connector; a special release key is then required to uncouple the connectors.
Specifications VEAM PowerLock Electrical Number of Contacts Single Pole Current Rating 400 amp or 660 amp continuous Operating Voltage 1000V AC / 1500V DC Test Voltage 4500V AC Short Circuit Rating 16kA for 1s, 34kA peak Insulation Resistance >5000 Mohm Electrical Protection IP2X Finger touch protected Contact Resistance <0.
VEAM PowerLock How to Order Body Style Example = NLDFT Description Code Line Source Line Drain Panel Source Panel Drain NLS NLDFT NPS NPDFT Ground / Green Neutral / Blue Neutral / White Neutral / Black Line 1 / Brown Line 1 / Black Line 1 / Red Line 2 / Black Line 2 / Red Line 2 / White Line 3 / Grey Line 3 / Blue E-GN N-BL N-W N-BK 1-BN 1-BK 1-R 2-BK 2-R 2-W 3-GY 3-BL Use with NLDFT & NPDFT L Leave blank for NLS & NPS Crimp 300mm² copper cable* Crimp 240mm² copper cable* Crimp 185mm² copper cable*
Line Source VEAM PowerLock Line Source is the connector with a male contact which is normally connected to the source of the power. The contacts are fitted with a plastic end cap that prevents accidental finger touching of live parts of the connector and meets IP2X requirements. Different contacts are available to suit cable conductors from 25 mm² to 300 mm². Connectors rated either 400 amp or 660 amp, can be fitted to a wide range of copper cables, and to aluminium cables on request.
Line Drain VEAM PowerLock Line Drain is the connector with a female contact which is not normally the live part, however they are fitted with a spring loaded plastic cap that prevents accidental finger touching of the contact, and the connector meets IP2X requirements. Contacts are available to suit cable conductors from 25mm² to 300mm². Connectors rated either 400 amp or 660 amp, can be fitted to a wide range of copper cables, and to aluminium cables on request.
Panel Source VEAM PowerLock Threaded post version shown 42.50 Panel Source connectors are supplied fully assembled with the male contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug, or M12 threaded hole for fixing with a bolt. These connectors are rated either 400 amp (T4 / H4) or 660 amp (T6 / H6). 42.
Panel Drain VEAM PowerLock Panel Drain connectors are supplied fully assembled with the female contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug. These connectors rated either 400 amp (T4) or 660 amp (T6). This connector is fitted with the secondary locking pin for secure connections, see explanation on Line Drain page 13. 42.50 47.00 42.
VEAM PowerLock Panel Drain with Backshell Panel Drain connectors (SKPP) can be supplied with a backshell to provide a watertight fitting to the cable. These connectors are supplied with a loose female contact that is fitted to the cable before being assembled into the connector housing. Connectors rated either 400 amp or 660 amp, can be fitted to a wide range of copper cables, and to aluminium cables on request.
Sequential Connecting Box VEAM PowerLock A PowerLock Box is a 3 phase high power connecting unit, used as a termination point for power cables. The boxes include a number of safety features to prevent incorrect connection and disconnection. All PowerLock devices are ‘keyed’ to eliminate the possibility of connecting with the wrong line, and color coded to suit international 3 phase standards.
VEAM Power Lock Sequential Connecting Box Technical Overview The PowerLock Box is designed for use in high current applications and offers many safety and security benefits when compared with a set of individual connectors.
Sequential Connecting Box VEAM PowerLock Mounting Options The PowerLock Box is designed for mounting to 19” racks or to a panel cut out. For 19” rack mounting the unit is supplied to fit a 2U spacing, and where an overlap is required for fitting to a panel cut out, the PowerLock Box can be supplied with a flange, making the overall height 107mm. The rear view of a flanged version is shown (right).
VEAM Power Lock Steel Cabinets for PowerLock Box and NRG Box The PowerLock Power Distribution Cabinet has been designed and tested to conform to the requirements for CE marking by implementing the requirements of the Low Voltage Directive (LVD) 73/23/EEC which is implemented as the Electrical Equipment (Safety) Regulations 1994.
Insulated G Style Clamp VEAM PowerLock • Completely insulated which allows for direct connection of a generator cable to a live low voltage busbar. • The clamp is fixed to the busbar by means of an insulated box spanner which meets the requirements of IEC 60900 (live working, hand tools for use up to 1000Vac and 1500Vdc). A PowerLock generator input connection point is incorporated within the clamp to allow for direct connection of the generator cable end.
Insulated G Style Clamp VEAM PowerLock • Completely insulated which allows for direct connection of a generator cable to a live low voltage busbar. • The clamp is fixed to the busbar by means of an insulated box spanner which meets the requirements of IEC 60900 (live working, hand tools for use up to 1000Vac and 1500Vdc). A PowerLock generator input connection point is incorporated within the clamp to allow for direct connection of the generator cable end.
Insulated Horizontal Clamp VEAM PowerLock • Completely insulated which allows for direct connection of a generator cable to a live low voltage busbar. • The clamp is fixed to the busbar by means of an insulated box spanner which meets the requirements of IEC 60900 (live working, hand tools for use up to 1000Vac and 1500Vdc). A PowerLock generator input connection point is incorporated within the clamp to allow for direct connection of the generator cable end.
Rotary Clamp / T Connector VEAM PowerLock Rotary Clamp / Generator Connector (FRED) • Compact unit incorporates a Line Source Finger Proof connector with a rotary type clamp, suitable for use on slotted Bus-bars. The handle meets the requirements of IEC 60900 (live working, hand tools for use up to 1000Vac and 1500Vdc). • The clamp is manufactured in high conductivity material and is suitable for 660A continuous operation.
Insulated Generator Connectors VEAM PowerLock This compact unit incorporates a PowerLock generator input connection point with a rear termination area to accept solid alloy cable cores. This enables a temporary mobile generator to be connected to an underground cable when repair work is undertaken. The cable is excavated, cut and the PowerLock connector then fitted to the cable cores via 2 set screws. The generator cable end can then directly link into the underground cable.
Cable Lug Converter VEAM PowerLock The Multi-Converter enables any user to easily convert lugged cable to PowerLock within minutes ensuring all safety and security of basic PowerLock connector series. A PowerLock connection point is incorporated within the unit to allow for direct connection of the generator cable end. Available in both Source and Drain formats, this device assures the correct connection whether it be PowerLock or Lug to maximize cable management.
VEAM PowerLock PowerLock Lug Connector These devices allow for the conversion of PowerLock plug and socket system to a standard nut and bolt fixing. The units are simply connected to the PowerLock line connectors and locked to avoid accidental disconnection. Ordering information - see page 11 for full line color and color selection.
Sealing Cap VEAM PowerLock When not mated, the connector interface can be protected by using a sealing cap. Two types of cap are offered, a simple soft plastic cap providing IP53 protection and an environmentally sealed rigid plastic cap with IP67 protection and the secondary lock feature, these are color coded to suit the parent connector. All caps are fitted with a cord lanyard for securing to it’s parent connector.
Fuse Carrier with Integral Generator Input Connector VEAM PowerLock JW4ST (3.625” / 92mm pitch) fuse carrier was developed to provide a safe and efficient means of connecting a mobile generator supply cable to fully shrouded or non-shrouded distribution boards. The unit complies with the requirements of EATS 37.2. The generator cable (when fitted with PowerLock Line Drain cable coupler) can be plugged directly into the Fuse Carrier and used to feed either the Low Voltage bus-bar or feeder circuit.
VEAM PowerLock DIN Fuse Carrier Adaptor This Fuse carrier adaptor was developed to provide a safe and efficient PowerLock connection to DIN fuse carrier racks which are mounted on most of the European power distribution boards. There are Full Blade and Half Blade versions available which give the user an option to select what side needs to be fed. For part numbers and ordering information, please contact ITT VEAM / Cannon or our local distributor.
Introduction VEAM Snaplock The Snaplock connector series is a miniature power cable hook up system offering high current capability while maintaining minimal physical dimensions. Snaplock offers a commercially viable option to historical hard wiring techniques. In addition, Snaplock offers improved safety characteristics through utilization of insulated bodies, sealing mechanisms, locking mechanisms and protected current carrying elements.
VEAM Snaplock How to Order Example = Description Code Panel Male - M12 post fixing Panel Female - M12 post fixing Panel Female with Cable Fixing Cable Male - cable fixing Cable Female - cable fixing SNPM SNPF SNPFL SNLM SNLF Body Contact Contact Gland Body Style Gender Size Nut Color SNLM — P — C50 — 25L — GN IMPORTANT SAFETY INFORMATION Standard PowerLock and SnapLock contact are copper based contacts, they should not be used for direct termination onto aluminum cables as galvanic corrosion and overheat
Specifications VEAM Snaplock Electrical Number of Contacts Single Pole Current Rating 250 amp continuous Operating Voltage 1000V AC / 1500V DC Test Voltage 4500V AC Dielectric Strength 4500V AC Electrical Protection IP2X on male connector Contact Resistance <0.
Panel Connectors VEAM Snaplock Male Panel Plug Order codeSNPM-P-TP-XX Female Panel Socket Order codeSNPF-S-TP-XX The standard panel connectors are mounted through 4 holes in the flange. The rear of the connector has an M12 threaded post fitted with a nut and lock washer, to take a cable fitted with a standard cable lug. Male and female connectors are available in a range of colors, and all panel connectors are fitted with a gasket.
Tooling VEAM PowerLock and Snaplock Crimp Tool - C130 000V74174 Crimp Tool with Case 274-7634-000 Crimp Tool with PowerLock Dies and Case (Dies include - C50, C70, C95, C120, C150, C185, C240 and C300) 320-7732-000 Crimp Tool with Snaplock Dies and Case (Dies include - C25, C35, C50, and C70) 320-7731-000 Crimp Die C25 (30220) 995-7654-025 Crimp Die C35 (30221) 995-7654-035 Crimp Die C50 (30222) 995-7654-050 Crimp Die C70 (30223) 995-7654-070 Crimp Die C95 (30224) 995-7654-095 Crimp Die
Notes Specifications and dimensions subject to change www.ittcannon.
Product Safety and Warranty 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials.
Circular/Filter/Hermetic/Fiber Optic Connectors As a world leader in circular, filter, and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configurations for various harsh environments.
Specifications and dimensions subject to change www.ittcannon.
